PECB ISO 45001 ISO-45001-Lead-Auditor

경쟁율이 치열한 IT시대에 ISO-45001-Lead-Auditor시험을 패스하여 자격증을 취득함으로 IT업계 관련 직종에 종사하고자 하시는 분들께는 아주 큰 가산점이 될수 있고 자신만의 위치를 보장할수 있으며 더욱이는 한층 업된 삶을 누릴수 있을수도 있습니다. ISO-45001-Lead-Auditor덤프로 ISO-45001-Lead-Auditor시험에서 실패하면 ISO-45001-Lead-Auditor덤프비용을 보상해드리기에 안심하고 시험준비 하셔도 됩니다.

가장 최근 출제된 ISO-45001-Lead-Auditor인증시험문제를 바탕으로 만들어진 적중율 최고인 ISO-45001-Lead-Auditor덤프로 간단한 시험패스는 더는 꿈이 아닙니다. ISO-45001-Lead-Auditor덤프는 pdf버전과 온라인버전으로 되어있는데 pdf버전은 출력가능하고 온라인버전은 휴대폰에서도 사용가능합니다. ISO-45001-Lead-Auditor덤프를 패키지로 구매하시면 더 저렴한 가격에 구매하실수 있습니다.

ISO-45001-Lead-Auditor인기덤프자료는 고객님의 IT업계 종사자로서의 전환점이 될수 있습니다. ISO-45001-Lead-Auditor시험을 패스하여 자격증을 취득하여 승진 혹은 연봉협상 방면에서 자신만의 위치를 지키고 더욱 멋진 IT인사로 거듭날수 있도록 고고싱할수 있습니다. 인기 높은 ISO-45001-Lead-Auditor덤프자료는 시중에서 가장 최신버전으로서 시험패스를 보장해드립니다.

ISO-45001-Lead-Auditor시험을 빨리 패스해야 되는데 어디서부터 어떻게 시험준비를 시작해야 하는지 갈피를 잡을수 없는 분들은 저희 사이트를 주목해주세요. ISO-45001-Lead-Auditor 최신버전 덤프만 공부하면 시험패스에 자신이 생겨 불안한 상태에서 벗어날수 있습니다. ISO-45001-Lead-Auditor덤프는 시장에서 가장 최신버전이기에 최신 시험문제의 모든 시험범위와 시험유형을 커버하여 ISO-45001-Lead-Auditor시험을 쉽게 패스하여 자격증을 취득하여 찬란한 미래에 더 다가갈수 있도록 도와드립니다.

PECB ISO-45001-Lead-Auditor 시험요강:

참조: https://pecb.com/en/education-and-certification-for-individuals/iso-45001/iso-45001-lead-auditor

최신 ISO 45001 ISO-45001-Lead-Auditor 무료샘플문제

문제 #1
You are conducting a Stage 2 audit of a steel fabrication works that uses powerful presses to shape steel sheets into various car panels. You note from the accident book that more staff hours have been lost through accidents associated with the presses than those associated with any other equipment.
You question the OH and S manager who tells you, " These big presses are just inherently more dangerous than other equipment. If there is an accident, it ' s going to be more serious as a result of the forces at work. " Which three of the following audit trails would it now be appropriate to pursue?

A. Ensure that the organisation had recorded the reoccurring accidents as an external issue in its determination of context of the organisation. Ensure all interested parties had been informed.
B. Check that the workers who had been injured had received appropriate compensation, so they did not suffer financially from their accidents or working hours lost while recovering.
C. Determine whether there were any maintenance issues that resulted in the machines being unsafe to use, such as broken or missing guards or faulty emergency stop buttons.
D. Determine whether hazard identification had taken place in respect of the pressing process. If it did, what OH and S risks were identified and what actions were instigated to mitigate these risks?
E. Determine whether the organisation had considered changing the panels to plastic mouldings which would be less likely to cause accidents.
F. Ask top management to explain how the reoccurring accidents would affect the setting of future OH and S objectives.
G. Check whether the organisation has big enough finances to invest in fully automated pressing machines which would not need manual workers.

문제 #2
An audit team leader who has been contracted to perform a full Occupational Health and Safety management system audit is conducting a documented information review in preparation for the audit.
Which four options are a benefit of completing this task?

A. Verify the number of personnel.
B. Reduce the number of interviews to conduct during the onsite audit.
C. Gain a better understanding of the auditee ' s processes and activities.
D. The auditor can retain a copy of the documented procedure for emergency response for use after the audit.
E. Identify high-risk areas for prioritisation during the onsite audit.
F. Verify the scope of the OH and S management system.
G. Confirm the required audit team size and competency.
H. Reduce the duration of the overall audit by identifying procedural nonconformities.

문제 #3
Whistlekleen is a national dry cleaning and laundry organization with 50 shops. You are conducting an OHSMS surveillance audit of the head office and are sampling health and safety performance monitoring.
You find that 80 per cent of incident originate from five shops in the same region. Most of these relate to staff and customer feeling unwell due to breathing in the pungent atmosphere. Some required to be hospitalized.
The OHS Manager tells you that these are the oldest shops in the organization. The cleaning equipment emits Volatile Organic Compounds (VOCs) and needs replacing but the organisation cannot afford it at the moment.

A. Monitor VOC emissions to ensure compliance with safe limits.
B. Conduct an internal enquiry to establish who is to blame.
C. Advise that the faulty equipment will be replaced within the next two years.
D. Apologise to the Agency and advise that corrective action will be taken within 15 days.
E. Investigate changing the cleaning process to use chemicals with safe VOC content.
F. Defend the court case and await the legal outcome.
G. On raising the matter with senior management, you are told that there are plans to replace the equipment in these shops over the next five years.
H. Select the three best options for how this should be handled by the organisation through its OHSMS.
I. Give an explanation to the Agency of what went wrong.
J. When reviewing the nonformity report files, you find the organization is facing a legal dispute with the Health and Safety Agency over multiple breaches of OHAandS legislation.
K. Offer to compensate employees and customers for possible health implications.

문제 #4
Consider the emergency preparedness and response process outlined in ISO 45001. Match each process activity to the correct stage of the PDCA cycle.
To complete the table click on the blank section you want to complete so it is highlighted in red and then click on the applicable text from the options the appropriate process. "

문제 #5
Showitoff is an organisation spcialising in the design and production of wall decorating material for the domestic market. During an ISO 45001 certification audit of the site, the auditor comes across an open, walled area just outside the maintenance department. It contains various scraps of wood and metal as well as several rusty components. Several heavy concrete beams are learning against a thin brick wall in which cracks are visible. When asked about it, the OHS Manager states that he presume that the material come from maintenance work, so it is the Maintenance Manager's responsibility.
The auditor interviews the Maintenance Manager in his department. He asks about the area outside and is told that it contains some excess materials that the Manager likes to keep in case they come in handy at some stage. The auditor points out that the wall appears to be unstable collapse at any moment. The Maintenance Manager is not aware of such a situation.
Which three statement represent good audit practice?

A. The audit should raise a nonconformity against ISO 45001.
B. The audit should ask the Maintenance Manager to conduct a safety survey.
C. The audit should refer the organization to the health and safety authorities.
D. The audit should demand that the Maintenance Manager deals with the wall.
E. The auditor should check whether the organization has identified the safety hazards associated with the walled area.
F. The auditor should advice the organisation to get rid of the walled area.
G. The auditor should consider surveying more areas of the site for other potentially unsafe situations.
H. The audit should check the lines of communication between the OHS Manager and maintenance Manager.

질문과 대답: